From: Iskren Chernev <iskren.chernev@gmail.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	~postmarketos/upstreaming@lists.sr.ht,
	linux-arm-msm@vger.kernel.org,
	Iskren Chernev <iskren.chernev@gmail.com>
Subject: [PATCH 0/7] ARM: dts: qcom: msm8974: klte: Enable some hardware
Date: Tue, 30 Jun 2020 17:09:05 +0300
Message-Id: <20200630140912.260294-1-iskren.chernev@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Enable support for various hw found on the Samsung Galaxy S5:
- touchkey (the two buttons around the home button)
- touchscreen
- notification led
- wifi
- external SD card

Please note that for working wifi the correct firmware is needed. Check [=
1]
for links and locations.

Also note, that to actually run a mainline kernel on the klte, you'd need
to apply this patch [2]. Any feedback on getting this to run on pure
mainline are welcome.

[1] https://gitlab.com/postmarketOS/pmaports/-/blob/master/firmware/firmw=
are-samsung-klte/APKBUILD
[2] https://gitlab.com/postmarketOS/linux-postmarketos/-/commit/765f55b24=
8cd3b231af8431fe2f2aeca263b4e4b

Iskren Chernev (7):
  ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes
  ARM: dts: qcom: msm8974-klte: Add support for touchkey
  ARM: dts: qcom: msm8974-klte: Add support for touchscreen
  ARM: dts: qcom: msm8974-klte: Add support for led
  ARM: dts: qcom: msm8974-klte: Add gpio expander chip
  ARM: dts: qcom: msm8974-klte: Add support for wifi
  ARM: dts: qcom: msm8974-klte: Add support for SD card

 .../boot/dts/qcom-msm8974-samsung-klte.dts    | 301 +++++++++++++++++-
 1 file changed, 292 insertions(+), 9 deletions(-)


base-commit: c28e58ee9dadc99f79cf16ca805221feddd432ad
--
2.27.0