Authentication-Results: mail-b.sr.ht; dkim=pass header.d=z3ntu.xyz header.i=@z3ntu.xyz Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by mail-b.sr.ht (Postfix) with ESMTPS id C7C1211EEC2 for <~postmarketos/upstreaming@lists.sr.ht>; Sat, 11 Sep 2021 23:28:11 +0000 (UTC) Received: from localhost.localdomain (ip-213-127-63-121.ip.prioritytelecom.net [213.127.63.121]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id CCC61CB201; Sat, 11 Sep 2021 23:28:10 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1631402891; bh=vmQ4rNn9xJWouEc9m40mcIxw0axx16PXLSt9GfYTuFM=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=nNFw4kxUDtCedYnt3PKINnVoATt+CXO0+C0jVgGkkC2mRgemdY0okPhOH5LvmnI1b LFmhpnbju2WpvK5k7AJ/QWp4vh/mbcz1ad2RRnv9nq+SfHkvMzPMIe/z6QOnvykJJL f38X2ldlW80KJFNkGrYSIYiKJH1qm+7ZFLyeoIQ8= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, bartosz.dudziak@snejp.pl, Luca Weiss , Arnd Bergmann , Olof Johansson , soc@kernel.org, Rob Herring , Andy Gross , Bjorn Andersson , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 8/8] ARM: dts: qcom: Add support for LG G Watch R Date: Sun, 12 Sep 2021 01:27:02 +0200 Message-Id: <20210911232707.259615-9-luca@z3ntu.xyz> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20210911232707.259615-1-luca@z3ntu.xyz> References: <20210911232707.259615-1-luca@z3ntu.xyz> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add a device tree for the LG G Watch R smartwatch, manufactured by LG Electronics and based on the msm8226 platform (apq8026). Currently UART, internal storage, power button and touchscreen are supported. Signed-off-by: Luca Weiss --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts | 237 +++++++++++++++++++ 2 files changed, 238 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e0934180724..8cb859728bd9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -939,6 +939,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox810se-wd-mbwe.dtb \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8026-lge-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts new file mode 100644 index 000000000000..02c8dfb0988a --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-lge-lenok.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Luca Weiss + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "LG G Watch R"; + compatible = "lge,lenok", "qcom,apq8026"; + qcom,board-id = <132 0x0a>; + qcom,msm-id = <199 0x20000>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <384000>; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l22>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1275000>; + }; + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + touch_pins: touch { + irq { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <8>; + bias-pull-down; + input-enable; + }; + + reset { + pins = "gpio16"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; -- 2.33.0