~postmarketos/upstreaming

OnePlus 5/5T support v1 PROPOSED

Jami Kettunen
Jami Kettunen: 2
 arm64: dts: qcom: Add support for OnePlus 5/5T
 arm64: dts: qcom: msm8998: Disable MSS remoteproc by default

 7 files changed, 593 insertions(+), 0 deletions(-)
Export patchset (mbox)
How do I use this?

Copy & paste the following snippet into your terminal to import this patchset into git:

curl -s https://lists.sr.ht/~postmarketos/upstreaming/patches/21828/mbox | git am -3
Learn more about email & git
View this thread in the archives

[PATCH v2 1/2] arm64: dts: qcom: Add support for OnePlus 5/5T Export this patch

Jami Kettunen
Add device trees for OnePlus 5 (cheeseburger) and 5T (dumpling)
MSM8998 SoC smartphones with initial support included for:

- UFS internal storage
- USB peripheral mode
- Display
- Touch
- Bluetooth
- Hall effect sensor
- Power and volume buttons
- Capacitive keypad button backlight (on cheeseburger)

Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../dts/qcom/msm8998-oneplus-cheeseburger.dts |  42 ++
 .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 514 ++++++++++++++++++
 .../dts/qcom/msm8998-oneplus-dumpling.dts     |  25 +
 4 files changed, 583 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 549a7a2151d4..1beb73f564f7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -27,6 +27,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-cheeseburger.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
new file mode 100644
index 000000000000..66b9297588ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -0,0 +1,42 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
 * OnePlus 5 (cheeseburger) device tree
 *
 * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
 */

#include <dt-bindings/leds/common.h>
#include "msm8998-oneplus-common.dtsi"

/ {
	model = "OnePlus 5";
	compatible = "oneplus,cheeseburger", "qcom,msm8998";
	/* Required for bootloader to select correct board */
	qcom,board-id = <8 0 16859 23>;

	/* Capacitive keypad button backlight */
	leds {
		compatible = "gpio-leds";

		pinctrl-names = "default";
		pinctrl-0 = <&button_backlight_default>;

		button-backlight {
			gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_WHITE>;
			function = LED_FUNCTION_KBD_BACKLIGHT;
			default-state = "off";
		};
	};
};

&pmi8998_gpio {
	button_backlight_default: button-backlight-default {
		pinconf {
			pins = "gpio5";
			function = "normal";
			bias-pull-down;
			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
		};
	};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
new file mode 100644
index 000000000000..0f5c7828a901
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -0,0 +1,514 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
 * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi
 *
 * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
 * Copyright (c) 2016, The Linux Foundation. All rights reserved.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "msm8998.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
#include "pm8005.dtsi"

/ {
	/* Required for bootloader to select correct board */
	qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */

	chosen {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */
		framebuffer0: framebuffer@9d400000 {
			compatible = "simple-framebuffer";
			reg = <0x0 0x9d400000 0x0 0x2400000>;
			width = <1080>;
			height = <1920>;
			stride = <(1080 * 4)>;
			format = "a8r8g8b8";
		};
	};

	reserved-memory {
		/* Bootloader display framebuffer region */
		cont_splash_mem: memory@9d400000 {
			reg = <0x0 0x9d400000 0x0 0x2400000>;
			no-map;
		};

		/* For getting crash logs using Android downstream kernels */
		ramoops@ac000000 {
			compatible = "ramoops";
			reg = <0x0 0xac000000 0x0 0x200000>;
			console-size = <0x80000>;
			pmsg-size = <0x40000>;
			record-size = <0x8000>;
			ftrace-size = <0x20000>;
		};

		/*
		 * The following memory regions on downstream are "dynamically allocated"
		 * but given the same addresses every time. Hard code them as these addresses
		 * are where the OnePlus signed firmware expects them to be.
		 */
		ipa_fws_region: ipa@f6800000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xf6800000 0x0 0x5000>;
			no-map;
		};
		zap_shader_region: gpu@f6900000 {
			compatible = "shared-dma-pool";
			reg = <0x0 0xf6900000 0x0 0x2000>;
			no-map;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		label = "Volume buttons";
		autorepeat;

		pinctrl-names = "default";
		pinctrl-0 = <&vol_keys_default>;

		vol-down {
			label = "Volume down";
			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEDOWN>;
			debounce-interval = <15>;
			wakeup-source;
		};

		vol-up {
			label = "Volume up";
			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
			debounce-interval = <15>;
			wakeup-source;
		};
	};

	gpio-hall-sensor {
		compatible = "gpio-keys";
		label = "Hall effect sensor";

		pinctrl-names = "default";
		pinctrl-0 = <&hall_sensor_default>;

		hall-sensor {
			label = "Hall Effect Sensor";
			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
			linux,input-type = <EV_SW>;
			linux,code = <SW_LID>;
			linux,can-disable;
			wakeup-source;
		};
	};

	vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-always-on;
		regulator-boot-on;
	};
};

/*
 * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem
 * region by 4 MiB to account for this while relocating the other now
 * conflicting memory nodes accordingly.
 */
&adsp_mem {
	reg = <0x0 0x8b200000 0x0 0x1e00000>;
};
&mpss_mem {
	reg = <0x0 0x8d000000 0x0 0x7000000>;
};
&venus_mem {
	reg = <0x0 0x94000000 0x0 0x500000>;
};
&mba_mem {
	reg = <0x0 0x94500000 0x0 0x200000>;
};
&slpi_mem {
	reg = <0x0 0x94700000 0x0 0xf00000>;
};
&ipa_fw_mem {
	reg = <0x0 0x95600000 0x0 0x10000>;
};
&ipa_gsi_mem {
	reg = <0x0 0x95610000 0x0 0x5000>;
};
&gpu_mem {
	reg = <0x0 0x95615000 0x0 0x100000>;
};
&wlan_msa_mem {
	reg = <0x0 0x95715000 0x0 0x100000>;
};

&blsp1_i2c5 {
	status = "okay";

	touchscreen@20 {
		compatible = "syna,rmi4-i2c";
		reg = <0x20>;
		#address-cells = <1>;
		#size-cells = <0>;

		interrupt-parent = <&tlmm>;
		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;

		pinctrl-names = "default";
		pinctrl-0 = <&ts_int_active &ts_reset_active>;

		vdd-supply = <&vreg_l28_3p0>;
		vio-supply = <&vreg_l6a_1p8>;

		syna,reset-delay-ms = <20>;
		syna,startup-delay-ms = <20>;

		rmi4-f01@1 {
			reg = <0x01>;
			syna,nosleep-mode = <1>;
		};

		rmi4_f12: rmi4-f12@12 {
			reg = <0x12>;
			syna,rezero-wait-ms = <20>;
			syna,sensor-type = <1>;
			touchscreen-x-mm = <68>;
			touchscreen-y-mm = <122>;
		};
	};
};

&blsp1_uart3 {
	status = "okay";

	bluetooth {
		compatible = "qcom,wcn3990-bt";

		vddio-supply = <&vreg_s4a_1p8>;
		vddxo-supply = <&vreg_l7a_1p8>;
		vddrf-supply = <&vreg_l17a_1p3>;
		vddch0-supply = <&vreg_l25a_3p3>;
		max-speed = <3200000>;
	};
};

&blsp1_uart3_on {
	rx {
		/delete-property/ bias-disable;
		/*
		 * Configure a pull-up on 46 (RX). This is needed to
		 * avoid garbage data when the TX pin of the Bluetooth
		 * module is in tri-state (module powered off or not
		 * driving the signal yet).
		 */
		bias-pull-up;
	};

	cts {
		/delete-property/ bias-disable;
		/*
		 * Configure a pull-down on 47 (CTS) to match the pull
		 * of the Bluetooth module.
		 */
		bias-pull-down;
	};
};

&blsp2_uart1 {
	status = "okay";
};

&pm8005_lsid1 {
	pm8005-regulators {
		compatible = "qcom,pm8005-regulators";

		vdd_s1-supply = <&vph_pwr>;

		pm8005_s1: s1 { /* VDD_GFX supply */
			regulator-min-microvolt = <524000>;
			regulator-max-microvolt = <1100000>;
			regulator-enable-ramp-delay = <500>;

			/* hack until we rig up the gpu consumer */
			regulator-always-on;
		};
	};
};

&pm8998_gpio {
	vol_keys_default: vol-keys-default {
		pinconf {
			pins = "gpio5", "gpio6";
			function = "normal";
			bias-pull-up;
			input-enable;
			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
		};
	};
};

&qusb2phy {
	status = "okay";

	vdda-pll-supply = <&vreg_l12a_1p8>;
	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};

&rpm_requests {
	pm8998-regulators {
		compatible = "qcom,rpm-pm8998-regulators";

		vdd_s1-supply = <&vph_pwr>;
		vdd_s2-supply = <&vph_pwr>;
		vdd_s3-supply = <&vph_pwr>;
		vdd_s4-supply = <&vph_pwr>;
		vdd_s5-supply = <&vph_pwr>;
		vdd_s6-supply = <&vph_pwr>;
		vdd_s7-supply = <&vph_pwr>;
		vdd_s8-supply = <&vph_pwr>;
		vdd_s9-supply = <&vph_pwr>;
		vdd_s10-supply = <&vph_pwr>;
		vdd_s11-supply = <&vph_pwr>;
		vdd_s12-supply = <&vph_pwr>;
		vdd_s13-supply = <&vph_pwr>;
		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
		vdd_l6-supply = <&vreg_s5a_2p04>;
		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
		vdd_l9-supply = <&vreg_bob>;
		vdd_l10_l23_l25-supply = <&vreg_bob>;
		vdd_l13_l19_l21-supply = <&vreg_bob>;
		vdd_l16_l28-supply = <&vreg_bob>;
		vdd_l18_l22-supply = <&vreg_bob>;
		vdd_l20_l24-supply = <&vreg_bob>;
		vdd_l26-supply = <&vreg_s3a_1p35>;
		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;

		vreg_s3a_1p35: s3 {
			regulator-min-microvolt = <1352000>;
			regulator-max-microvolt = <1352000>;
		};
		vreg_s4a_1p8: s4 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-allow-set-load;
		};
		vreg_s5a_2p04: s5 {
			regulator-min-microvolt = <1904000>;
			regulator-max-microvolt = <2040000>;
		};
		vreg_s7a_1p025: s7 {
			regulator-min-microvolt = <900000>;
			regulator-max-microvolt = <1028000>;
		};
		vreg_l1a_0p875: l1 {
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <880000>;
		};
		vreg_l2a_1p2: l2 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
		};
		vreg_l3a_1p0: l3 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
		};
		vreg_l5a_0p8: l5 {
			regulator-min-microvolt = <800000>;
			regulator-max-microvolt = <800000>;
		};
		vreg_l6a_1p8: l6 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <1808000>;
		};
		vreg_l7a_1p8: l7 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l8a_1p2: l8 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
		};
		vreg_l9a_1p8: l9 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l10a_1p8: l10 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l11a_1p0: l11 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
		};
		vreg_l12a_1p8: l12 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l13a_2p95: l13 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l14a_1p88: l14 {
			regulator-min-microvolt = <1880000>;
			regulator-max-microvolt = <1880000>;
		};
		vreg_l15a_1p8: l15 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l16a_2p7: l16 {
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <2704000>;
		};
		vreg_l17a_1p3: l17 {
			regulator-min-microvolt = <1304000>;
			regulator-max-microvolt = <1304000>;
		};
		vreg_l18a_2p7: l18 {
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <2704000>;
		};
		vreg_l19a_3p0: l19 {
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
		};
		vreg_l20a_2p95: l20 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-allow-set-load;
		};
		vreg_l21a_2p95: l21 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-allow-set-load;
			regulator-system-load = <800000>;
		};
		vreg_l22a_2p85: l22 {
			regulator-min-microvolt = <2864000>;
			regulator-max-microvolt = <2864000>;
		};
		vreg_l23a_3p3: l23 {
			regulator-min-microvolt = <3312000>;
			regulator-max-microvolt = <3312000>;
		};
		vreg_l24a_3p075: l24 {
			regulator-min-microvolt = <3088000>;
			regulator-max-microvolt = <3088000>;
		};
		vreg_l25a_3p3: l25 {
			regulator-min-microvolt = <3104000>;
			regulator-max-microvolt = <3312000>;
		};
		vreg_l26a_1p2: l26 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-allow-set-load;
		};
		vreg_l28_3p0: l28 {
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
		};
		vreg_lvs1a_1p8: lvs1 { };
		vreg_lvs2a_1p8: lvs2 { };
	};

	pmi8998-regulators {
		compatible = "qcom,rpm-pmi8998-regulators";

		vdd_bob-supply = <&vph_pwr>;

		vreg_bob: bob {
			regulator-min-microvolt = <3312000>;
			regulator-max-microvolt = <3600000>;
		};
	};
};

&tlmm {
	gpio-reserved-ranges = <0 4>, <81 4>;

	hall_sensor_default: hall-sensor-default {
		pins = "gpio124";
		function = "gpio";
		drive-strength = <2>;
		bias-disable;
		input-enable;
	};

	ts_int_active: ts-int-active {
		pins = "gpio125";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};

	ts_reset_active: ts-reset-active {
		pins = "gpio89";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};
};

&ufshc {
	status = "okay";

	vcc-supply = <&vreg_l20a_2p95>;
	vccq-supply = <&vreg_l26a_1p2>;
	vccq2-supply = <&vreg_s4a_1p8>;
	vcc-max-microamp = <750000>;
	vccq-max-microamp = <560000>;
	vccq2-max-microamp = <750000>;
};

&ufsphy {
	status = "okay";

	vdda-phy-supply = <&vreg_l1a_0p875>;
	vdda-pll-supply = <&vreg_l2a_1p2>;
	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
	vdda-phy-max-microamp = <51400>;
	vdda-pll-max-microamp = <14600>;
	vddp-ref-clk-max-microamp = <100>;
	vddp-ref-clk-always-on;
};

&usb3 {
	status = "okay";

	/* Disable USB3 clock requirement as the device only supports USB2 */
	qcom,select-utmi-as-pipe-clk;
};

&usb3_dwc3 {
	/* Drop the unused USB 3 PHY */
	phys = <&qusb2phy>;
	phy-names = "usb2-phy";

	/* Fastest mode for USB 2 */
	maximum-speed = "high-speed";

	/* Force to peripheral until we can switch modes */
	dr_mode = "peripheral";
};

&wifi {
	/* Leave disabled until MSS is functional */
	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
new file mode 100644
index 000000000000..544b9b0ae44b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
@@ -0,0 +1,25 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
 * OnePlus 5T (dumpling) device tree
 *
 * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
 */

#include "msm8998-oneplus-common.dtsi"

/ {
	model = "OnePlus 5T";
	compatible = "oneplus,dumpling", "qcom,msm8998";
	/* Required for bootloader to select correct board */
	qcom,board-id = <8 0 17801 43>;
};

/* Update the screen height values from 1920 to 2160 on the 5T */
&framebuffer0 {
	height = <2160>;
};

/* Adjust digitizer area height to match the 5T's taller panel */
&rmi4_f12 {
	touchscreen-y-mm = <137>;
};
-- 
2.31.1

[PATCH 2/2] arm64: dts: qcom: msm8998: Disable MSS remoteproc by default Export this patch

Jami Kettunen
This was already the case for ADSP and SLPI remoteprocs & doesn't affect
existing boards where it has been re-enabled.

Signed-off-by: Jami Kettunen <jamipkettunen@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 4 ++++
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi       | 4 ++++
 arch/arm64/boot/dts/qcom/msm8998.dtsi           | 2 ++
 3 files changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index b500f24d47bc..125d7923d713 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -281,6 +281,10 @@ vreg_lvs2a_1p8: lvs2 {
	};
};

&remoteproc_mss {
	status = "okay";
};

&tlmm {
	gpio-reserved-ranges = <0 4>, <81 4>;

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index c1ef0c71d5f5..a1d15eab8553 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -328,6 +328,10 @@ &remoteproc_adsp {
	status = "okay";
};

&remoteproc_mss {
	status = "okay";
};

&remoteproc_slpi {
	status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 1f2e93aa6553..e9d3ce29937c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1398,6 +1398,8 @@ remoteproc_mss: remoteproc@4080000 {
					<&rpmpd MSM8998_VDDMX>;
			power-domain-names = "cx", "mx";

			status = "disabled";

			mba {
				memory-region = <&mba_mem>;
			};
-- 
2.31.1