This patch series expand F(x)tec Pro1X (QX1050) device tree to support various components of the device. Most notably: + SD Card slot + Touchscreen + MDSS, DRM display panel + WLAN (ATH10K) + Hall sensor and camera button This patch series has been tested on Buildroot Linux with TQFTPSERV and RMTFS present in userspace. Signed-off-by: Dang Huynh <danct12@riseup.net> --- Changes in v3: - Fix dtschema errors - Reorder gpio nodes by it's number - Link to v2: https://lore.kernel.org/r/20240725-qx1050-feature-expansion-v2-0-5fac4bbd946f@riseup.net Changes in v2: - Squash copyright year commit to the hall sensor commit - Reorder pinctrl-n and pinctrl-names in several commits - Use interrupts-extended for touchscreen - Add further information to the caps lock LED node - Move status property from &wifi to the end of the node - Link to v1: https://lore.kernel.org/r/20240722-qx1050-feature-expansion-v1-0-c4d486435b96@riseup.net --- Dang Huynh (11): arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button arm64: dts: qcom: sm6115-pro1x: Add PCA9534 IO Expander arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen arm64: dts: qcom: sm6115-pro1x: Add Caps Lock LED arm64: dts: qcom: sm6115-pro1x: Enable SD card slot arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU arm64: dts: qcom: sm6115-pro1x: Hook up USB3 SS arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property arm64: dts: qcom: sm6115-pro1x: Enable RGB LED arm64: dts: qcom: sm6115-pro1x: Enable remoteprocs arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 343 +++++++++++++++++++++++- 1 file changed, 334 insertions(+), 9 deletions(-) --- base-commit: 41c196e567fb1ea97f68a2ffb7faab451cd90854 change-id: 20240722-qx1050-feature-expansion-7f6a2682f2ea Best regards, -- Dang Huynh <danct12@riseup.net>
Copy & paste the following snippet into your terminal to import this patchset into git:
curl -s https://lists.sr.ht/~postmarketos/upstreaming/patches/54226/mbox | git am -3Learn more about email & git
The Pro1X has a flip keyboard and a single-state camera button. Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 34 +++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 4a30024aa48f..70f479a63f2e 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> + * Copyright (c) 2023 - 2024, Dang Huynh <danct12@riseup.net> */ /dts-v1/; @@ -35,9 +35,25 @@ framebuffer0: framebuffer@5c000000 { gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&vol_up_n>; + pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>; pinctrl-names = "default"; + hall-switch { + label = "Hall Switch"; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + debounce-interval = <90>; + wakeup-source; + }; + + key-camera { + label = "Camera Button"; + linux,code = <KEY_CAMERA>; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + key-volume-up { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; @@ -212,6 +228,20 @@ &sleep_clk { &tlmm { gpio-reserved-ranges = <0 4>, <14 4>; + + key_camera_n: key-camera-n-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + hall_sensor_n: hall-sensor-n-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { -- 2.46.0
F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling touch screen VDD/VDDIO and keyboard's caps lock LED. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 70f479a63f2e..47e446249af6 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -70,6 +70,23 @@ &dispcc { status = "disabled"; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */
Caleb Connolly <caleb.connolly@linaro.org>This is the default, so you can drop this comment. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
+ clock-frequency = <100000>; + + pca9534: gpio@21 { + compatible = "nxp,pca9534"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; @@ -89,6 +106,10 @@ &pon_resin { status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; -- 2.46.0
Caleb Connolly <caleb.connolly@linaro.org>
The Fxtec Pro1X touchscreen uses Goodix GT9286 chip. Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 49 +++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 47e446249af6..813cd22907c8 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -63,6 +63,20 @@ key-volume-up { wakeup-source; }; }; + + ts_vdd_supply: ts-vdd-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vdd_supply"; + gpio = <&pca9534 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ts_vddio_supply: ts-vddio-supply { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio_supply"; + gpio = <&pca9534 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &dispcc { @@ -87,6 +101,27 @@ pca9534: gpio@21 { }; }; +&i2c2 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + + interrupts-extended = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + + irq-gpios = <&tlmm 80 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&ts_vdd_supply>; + VDDIO-supply = <&ts_vddio_supply>; + + pinctrl-0 = <&ts_int_n>, <&ts_rst_n>; + pinctrl-names = "default"; + }; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; @@ -257,6 +292,20 @@ key_camera_n: key-camera-n-state { bias-pull-up; }; + ts_rst_n: ts-rst-n-state { + pins = "gpio71"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_n: ts-int-n-state { + pins = "gpio80"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + hall_sensor_n: hall-sensor-n-state { pins = "gpio96"; function = "gpio"; -- 2.46.0
The Pro1X has a caps lock LED on the keyboard. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 813cd22907c8..b45ae3402741 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -8,6 +8,7 @@ #include "sm6115.dtsi" #include "pm6125.dtsi" #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/leds/common.h> / { model = "F(x)tec Pro1X (QX1050)"; @@ -64,6 +65,19 @@ key-volume-up { }; }; + gpio-leds { + compatible = "gpio-leds"; + + capslock-led { + label = "green:capslock"; + function = LED_FUNCTION_CAPSLOCK; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "kbd-capslock"; + default-state = "off"; + }; + }; + ts_vdd_supply: ts-vdd-supply { compatible = "regulator-fixed"; regulator-name = "ts_vdd_supply"; -- 2.46.0
Fxtec Pro1X has two card slots and allow either 2xSIM cards or 1xSIM, 1xSD Card configuration. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 32 +++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index b45ae3402741..67946d099976 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -191,6 +191,7 @@ pm6125_l4a: l4 { pm6125_l5a: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; + regulator-allow-set-load; }; pm6125_l6a: l6 { @@ -292,6 +293,37 @@ pm6125_l24a: l24 { }; }; +&sdc2_state_off { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_state_on { + cd-pins { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_state_on>; + pinctrl-1 = <&sdc2_state_off>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&pm6125_l22a>; + vqmmc-supply = <&pm6125_l5a>; + + status = "okay"; +}; + &sleep_clk { clock-frequency = <32764>; }; -- 2.46.0
Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 84 +++++++++++++++++++++++-- 1 file changed, 80 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 67946d099976..0301f04041e7 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -33,6 +33,26 @@ framebuffer0: framebuffer@5c000000 { }; }; + disp_elvdd_supply: disp-elvdd-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvdd_supply"; + }; + + disp_elvss_supply: disp-elvss-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_elvss_supply"; + }; + + disp_vcc_supply: disp-vcc-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vcc_supply"; + }; + + disp_vci_supply: disp-vci-supply { + compatible = "regulator-fixed"; + regulator-name = "disp_vci_supply"; + }; + gpio-keys { compatible = "gpio-keys"; @@ -93,13 +113,16 @@ ts_vddio_supply: ts-vddio-supply { }; }; -&dispcc { - /* HACK: disable until a panel driver is ready to retain simplefb */ - status = "disabled"; +&gpi_dma0 { + status = "okay"; }; -&gpi_dma0 { +&gpu { status = "okay"; + + zap-shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; + }; }; &i2c1 { @@ -136,6 +159,46 @@ touchscreen@14 { }; }; +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm6125_l18a>; + status = "okay"; + + panel: panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>; + + elvdd-supply = <&disp_elvdd_supply>; + elvss-supply = <&disp_elvss_supply>; + vcc-supply = <&disp_vcc_supply>; + vci-supply = <&disp_vci_supply>; + vddio-supply = <&pm6125_l9a>; + + pinctrl-0 = <&mdss_dsi_n &panel_en_n>; + pinctrl-names = "default"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; @@ -338,6 +401,12 @@ key_camera_n: key-camera-n-state { bias-pull-up; }; + panel_en_n: panel-en-n-state { + pins = "gpio65"; + function = "gpio"; + bias-disable; + }; + ts_rst_n: ts-rst-n-state { pins = "gpio71"; function = "gpio"; @@ -352,6 +421,13 @@ ts_int_n: ts-int-n-state { bias-pull-up; }; + mdss_dsi_n: mdss-dsi-n-state { + pins = "gpio82"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + hall_sensor_n: hall-sensor-n-state { pins = "gpio96"; function = "gpio"; -- 2.46.0
The F(x)tec Pro1X supports USB 3.0 through it's USB-C port. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 0301f04041e7..d28b870320c9 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -457,7 +457,6 @@ &usb { &usb_dwc3 { /delete-property/ usb-role-switch; - maximum-speed = "high-speed"; dr_mode = "peripheral"; }; @@ -468,6 +467,12 @@ &usb_hsphy { status = "okay"; }; +&usb_qmpphy { + vdda-phy-supply = <&pm6125_l4a>; + vdda-pll-supply = <&pm6125_l12a>; + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; -- 2.46.0
The USB-C port is used for powering external devices and transfer data from/to them. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 51 +++++++++++++++++++++++-- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index d28b870320c9..be77a8318800 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -7,8 +7,10 @@ #include "sm6115.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" #include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/usb/pd.h> / { model = "F(x)tec Pro1X (QX1050)"; @@ -209,6 +211,46 @@ vol_up_n: vol-up-n-state { }; }; +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -455,9 +497,8 @@ &usb { status = "okay"; }; -&usb_dwc3 { - /delete-property/ usb-role-switch; - dr_mode = "peripheral"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -473,6 +514,10 @@ &usb_qmpphy { status = "okay"; }; +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + &xo_board { clock-frequency = <19200000>; }; -- 2.46.0
This device has an RGB LED. It is used for notifications. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 27 +++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index be77a8318800..34834a3929b1 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -211,6 +211,33 @@ vol_up_n: vol-up-n-state { }; }; +&pmi632_lpg { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + &pmi632_typec { status = "okay"; -- 2.46.0
Enable [A,C]DSP and MPSS remote processor on this device. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 34834a3929b1..d3782b2a7831 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -291,6 +291,21 @@ &qupv3_id_0 { status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/Fxtec/QX1050/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/Fxtec/QX1050/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; -- 2.46.0
Enable onboard Wi-Fi on the F(x)tec Pro1X. For reference, HW/SW identifies as: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000 qmi fw_version 0x324103d6 fw_build_timestamp 2021-12-02 08:20 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.4-00982-QCAHLSWMTPLZ-1 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index d3782b2a7831..b419cd32215f 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -560,6 +560,17 @@ &usb_qmpphy_out { remote-endpoint = <&pmi632_ss_in>; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8a>; + vdd-1.8-xo-supply = <&pm6125_l16a>; + vdd-1.3-rfa-supply = <&pm6125_l17a>; + vdd-3.3-ch0-supply = <&pm6125_l23a>; + + qcom,ath10k-calibration-variant = "Fxtec_QX1050"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; -- 2.46.0