Luca Weiss: 1 media: i2c: imx412: Add missing newline to prints 1 files changed, 21 insertions(+), 21 deletions(-)
Copy & paste the following snippet into your terminal to import this patchset into git:
curl -s https://lists.sr.ht/~postmarketos/upstreaming/patches/55997/mbox | git am -3Learn more about email & git
Add trailing \n to dev_dbg and dev_err prints where missing.
Luca Weiss <luca.weiss@fairphone.com>Forgot to add: Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver") Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- drivers/media/i2c/imx412.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/media/i2c/imx412.c b/drivers/media/i2c/imx412.c index 0bfe3046fcc8726ef4e484d0fbf980422343fccc..c74097a59c42853ff2a1b600f28ff5aacedb1c6b 100644 --- a/drivers/media/i2c/imx412.c +++ b/drivers/media/i2c/imx412.c @@ -547,7 +547,7 @@ static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain) lpfr = imx412->vblank + imx412->cur_mode->height; - dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u", + dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u\n", exposure, gain, lpfr); ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1); @@ -594,7 +594,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) case V4L2_CID_VBLANK: imx412->vblank = imx412->vblank_ctrl->val; - dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u", + dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u\n", imx412->vblank, imx412->vblank + imx412->cur_mode->height); @@ -613,7 +613,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) exposure = ctrl->val; analog_gain = imx412->again_ctrl->val; - dev_dbg(imx412->dev, "Received exp %u, analog gain %u", + dev_dbg(imx412->dev, "Received exp %u, analog gain %u\n", exposure, analog_gain); ret = imx412_update_exp_gain(imx412, exposure, analog_gain); @@ -622,7 +622,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl) break; default: - dev_err(imx412->dev, "Invalid control %d", ctrl->id); + dev_err(imx412->dev, "Invalid control %d\n", ctrl->id); ret = -EINVAL; } @@ -803,14 +803,14 @@ static int imx412_start_streaming(struct imx412 *imx412) ret = imx412_write_regs(imx412, reg_list->regs, reg_list->num_of_regs); if (ret) { - dev_err(imx412->dev, "fail to write initial registers"); + dev_err(imx412->dev, "fail to write initial registers\n"); return ret; } /* Setup handler will write actual exposure and gain */ ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler); if (ret) { - dev_err(imx412->dev, "fail to setup handler"); + dev_err(imx412->dev, "fail to setup handler\n"); return ret; } @@ -821,7 +821,7 @@ static int imx412_start_streaming(struct imx412 *imx412) ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT, 1, IMX412_MODE_STREAMING); if (ret) { - dev_err(imx412->dev, "fail to start streaming"); + dev_err(imx412->dev, "fail to start streaming\n"); return ret; } @@ -895,7 +895,7 @@ static int imx412_detect(struct imx412 *imx412) return ret; if (val != IMX412_ID) { - dev_err(imx412->dev, "chip id mismatch: %x!=%x", + dev_err(imx412->dev, "chip id mismatch: %x!=%x\n", IMX412_ID, val); return -ENXIO; } @@ -927,7 +927,7 @@ static int imx412_parse_hw_config(struct imx412 *imx412) imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(imx412->reset_gpio)) { - dev_err(imx412->dev, "failed to get reset gpio %ld", + dev_err(imx412->dev, "failed to get reset gpio %ld\n", PTR_ERR(imx412->reset_gpio)); return PTR_ERR(imx412->reset_gpio); } @@ -935,13 +935,13 @@ static int imx412_parse_hw_config(struct imx412 *imx412) /* Get sensor input clock */ imx412->inclk = devm_clk_get(imx412->dev, NULL); if (IS_ERR(imx412->inclk)) { - dev_err(imx412->dev, "could not get inclk"); + dev_err(imx412->dev, "could not get inclk\n"); return PTR_ERR(imx412->inclk); } rate = clk_get_rate(imx412->inclk); if (rate != IMX412_INCLK_RATE) { - dev_err(imx412->dev, "inclk frequency mismatch"); + dev_err(imx412->dev, "inclk frequency mismatch\n"); return -EINVAL; } @@ -966,14 +966,14 @@ static int imx412_parse_hw_config(struct imx412 *imx412) if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) { dev_err(imx412->dev, - "number of CSI2 data lanes %d is not supported", + "number of CSI2 data lanes %d is not supported\n", bus_cfg.bus.mipi_csi2.num_data_lanes); ret = -EINVAL; goto done_endpoint_free; } if (!bus_cfg.nr_of_link_frequencies) { - dev_err(imx412->dev, "no link frequencies defined"); + dev_err(imx412->dev, "no link frequencies defined\n"); ret = -EINVAL; goto done_endpoint_free; } @@ -1034,7 +1034,7 @@ static int imx412_power_on(struct device *dev) ret = clk_prepare_enable(imx412->inclk); if (ret) { - dev_err(imx412->dev, "fail to enable inclk"); + dev_err(imx412->dev, "fail to enable inclk\n"); goto error_reset; } @@ -1145,7 +1145,7 @@ static int imx412_init_controls(struct imx412 *imx412) imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; if (ctrl_hdlr->error) { - dev_err(imx412->dev, "control init failed: %d", + dev_err(imx412->dev, "control init failed: %d\n", ctrl_hdlr->error); v4l2_ctrl_handler_free(ctrl_hdlr); return ctrl_hdlr->error; @@ -1183,7 +1183,7 @@ static int imx412_probe(struct i2c_client *client) ret = imx412_parse_hw_config(imx412); if (ret) { - dev_err(imx412->dev, "HW configuration is not supported"); + dev_err(imx412->dev, "HW configuration is not supported\n"); return ret; } @@ -1191,14 +1191,14 @@ static int imx412_probe(struct i2c_client *client) ret = imx412_power_on(imx412->dev); if (ret) { - dev_err(imx412->dev, "failed to power-on the sensor"); + dev_err(imx412->dev, "failed to power-on the sensor\n"); goto error_mutex_destroy; } /* Check module identity */ ret = imx412_detect(imx412); if (ret) { - dev_err(imx412->dev, "failed to find sensor: %d", ret); + dev_err(imx412->dev, "failed to find sensor: %d\n", ret); goto error_power_off; } @@ -1208,7 +1208,7 @@ static int imx412_probe(struct i2c_client *client) ret = imx412_init_controls(imx412); if (ret) { - dev_err(imx412->dev, "failed to init controls: %d", ret); + dev_err(imx412->dev, "failed to init controls: %d\n", ret); goto error_power_off; } @@ -1222,14 +1222,14 @@ static int imx412_probe(struct i2c_client *client) imx412->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad); if (ret) { - dev_err(imx412->dev, "failed to init entity pads: %d", ret); + dev_err(imx412->dev, "failed to init entity pads: %d\n", ret); goto error_handler_free; } ret = v4l2_async_register_subdev_sensor(&imx412->sd); if (ret < 0) { dev_err(imx412->dev, - "failed to register async subdev: %d", ret); + "failed to register async subdev: %d\n", ret); goto error_media_entity; } --- base-commit: ae58226b89ac0cffa05ba7357733776542e40216 change-id: 20241118-imx412-newlines-3b0321da960d Best regards, -- Luca Weiss <luca.weiss@fairphone.com>